TS-Monitor (LCD monitor)
A liquid crystal display is integrated into this unit. It allows checking each operating state, current position, electrical current and voltage values, etc.
for TS-X | KCA-M5119-00 |
---|---|
for TS-P | KCA-M5119-10 |
Handy terminal HT1 / HT1-D
Has graphic LCD display with backlight for easy viewing.
Standard type | KCA-M5110-0E |
---|---|
Enable switch type | KCA-M5110-1E |
Regenerative unit:RGT
A regeneration unit may be required depending on the model and operation conditions of the connected robot.
Model | KCA-M4107-00 |
---|
Support software TS-Manager
Besides data writing, editing and backup functions, the TS-Manager also offers cycle time simulation and various types of monitor functions.
Model | KCA-M4966-0J |
---|
Data cables
Communication cable for TS-Manager. Select from USB cable or D-sub cable.
D-Sub type (5m) | KCA-M538F-00 |
---|---|
USB type (5m) | KCA-M538F-A0 |
I/O cables (2m)
NPN or PNP I/O cables.
Color-coded flat cables.
Lattice type, 20 conductors × 2, total length 2 meters, one end unterminated.
(This cable is supplied with NPN and PNP units)
Model | KCA-M4421-20 |
---|
Absolute battery
Absolute battery basic specifications
Item | Absolute battery |
---|---|
Model | KCA-M53G0-10 |
Battery type | Lithium metallic battery |
Battery capacity | 3.6V / 1,650mAh |
Data holding time | About 1 year (in state with no power applied) |
Dimensions | φ18 × L50mm |
Weight | 24g |
Note. The absolute battery is subject to wear and requires replacement. If trouble occurs with the memory then remaining battery life is low so replace the absolute battery. The battery replacement period depends on usage conditions. But generally you should replace the battery after about 1 year counting the total time after connecting to the controller and left without turning on the power.
Daisy chain coupler cable
Model | KCA-M532L-00 |
---|
Up to sixteen units can be connected in a daisy chain.
Accessories and part options PDF (369KB)